Emphasis on the skillful use of aluminum plate support

Aluminium slats are a new type of production equipment for the embossing process. They have the advantages of firm and firm material texture, high processing precision, good resistance to pressure and deformation, etc., and provide a more reliable guarantee for the standardization of the embossing process and improvement of printing efficiency and quality.

According to a general purpose, aluminum strips are generally used as a plate center, a blank material, and a block edge in a letterpress letterpress printing process. In addition, it can also be used to expand the use of the application technology to achieve a multi-purpose. In the printing process, when the illustrations and the titles of small-format printing are printed, the traditional production process generally adopts plywood as a printing plate. However, such a printing plate is not solid and easily deformed, and the printed products often suffer from burrs and flowers.

Therefore, it is difficult to reuse this type of tray and waste valuable timber resources. Based on the above situation, if the height of the aluminum strip (which is also the thickness of the aluminum strip) is insufficient, it can be used to paste the zinc plate or the resin plate for printing. The original thickness of aluminum slats is almost the same as the height of empty aluminum. To be used as a printing plate, its thickness is obviously insufficient.

If the bottom of the aluminum plate is filled with cardboard, several layers are required to reach the height required for printing, and the printing pressure is also not solid enough to affect the printing quality. If a suitable thickness of empty lead is used, a double-sided adhesive tape is used to directly attach it to the back of the aluminum plate support, so that only a blank lead can be attached to both ends of the aluminum plate to reach the desired height for printing. Because the aluminum strips are both thick and hard, the printing pressure of the unfilled section in the middle can remain uniform.

The use of aluminum slats for plate support can not only facilitate and improve the stencil and plate effi- ciency of the small-size surface prints, but also improve the printing quality. The plates can be reused and the application effect is satisfactory.

Aluminium slats are a new type of production equipment for the embossing process. They have the advantages of firm and firm material texture, high processing precision, good resistance to pressure and deformation, etc., and provide a more reliable guarantee for the standardization of the embossing process and improvement of printing efficiency and quality.

According to a general purpose, aluminum strips are generally used as a plate center, a blank material, and a block edge in a letterpress letterpress printing process. In addition, it can also be used to expand the use of the application technology to achieve a multi-purpose. In the printing process, when the illustrations and the titles of small-format printing are printed, the traditional production process generally adopts plywood as a printing plate. However, such a printing plate is not solid and easily deformed, and the printed products often suffer from burrs and flowers.

Therefore, it is difficult to reuse this type of tray and waste valuable timber resources. Based on the above situation, if the height of the aluminum strip (which is also the thickness of the aluminum strip) is insufficient, it can be used to paste the zinc plate or the resin plate for printing. The original thickness of aluminum slats is almost the same as the height of empty aluminum. To be used as a printing plate, its thickness is obviously insufficient.

If the bottom of the aluminum plate is filled with cardboard, several layers are required to reach the height required for printing, and the printing pressure is also not solid enough to affect the printing quality. If a suitable thickness of empty lead is used, a double-sided adhesive tape is used to directly attach it to the back of the aluminum plate support, so that only a blank lead can be attached to both ends of the aluminum plate to reach the desired height for printing. Because the aluminum strips are both thick and hard, the printing pressure of the unfilled section in the middle can remain uniform.

The use of aluminum slats for plate support can not only facilitate and improve the stencil and plate effi- ciency of the small-size surface prints, but also improve the printing quality. The plates can be reused and the application effect is satisfactory.

Reprinted from: Shenzhen Printing Network

Warning light

Our factory was Founded in 1995,We specialize in production and developing led lighting safety products. We are committed to providing the selection of Led traffic baton, solar Road Stud, barricade light, led beacon, solar traffic signs,solar marine light. Currently we are largest manufacture for led traffic baton and solar barricade light products in China.

 Our mission is to develop quality, innovative lighting application safety products that help people to make safety easier, So we keep producing every little light for safety in now and future.

OUR PRODUCTS

Specifications:

1. Traffic Warning Light.

2. Function: flash /burn steady.

3. Light source:LED/halogen bulb.

4. Color:red/yellow.

5. 60 flashes/min.

6. Battery: two 6V 4R25 batteries

7. Battery life is 3 times longer than standard road lamp .

8. Anti-theft bracket is available.

 

Warning Light

Warning Light,Safety Light,Traffic Warning Light,Led Warning Light

NINGBO COOLBEAN SAFETY SOLUTIONS CO.,LTD , http://www.nb-coolbeansafety.com