Problems in the use of paper cutters

In actual use, the cutting objects that the paper cutting machine has to face are various. In addition to paper and cardboard, there are leather, plastic, cork flooring, and PS plates. Due to the wide variety of materials to be cut, different paper pressures should be used for different materials. The angle of the cutting edge should also be changed to ensure that high-quality cutting products are obtained.

The choice of cutting edge angle is a very important part of the cutting work. In other words, a good cutter requires a good cutter blade and sharpening process. However, we found in the after-sales service of the paper cutting machine that many users of paper cutting machines often overlooked this point. As a result, the cutting methods, angles, and angles of cutting blades are often incorrect, resulting in increased impact in cutting. Causes the safety screw to loosen or even break, eventually causing mechanical damage.

There is a growing range of materials that need to be cut with a paper cutter, such as beer aluminum foil caps, carbonless copy paper, honeycomb paperboard, magnetic cards, photographic film, etc. These materials will encounter different practical problems in the cutting process. Such as carbonless copy paper is prone to indentation when cutting, and the magnetic card, photographic film will appear in the cutting of the paper holder can not be fixed, resulting in cutting waste and so on. These problems can be solved smoothly by adjusting the pressure of the platen and improving the blade and cutting drive system. However, according to the author's understanding of these aspects of technology, at present, only some paper cutter manufacturers can solve all of them.

Photo Frame

Paper Gift Cards,Gift Card,Paper Lable,Paper Lable

Xing Hua Printing Factory , https://www.xinghuaprint.com